Introduction: Super Easy Light Up Picture Board
This light up board is all the fun for your kids.
Supplies
- Cardboard
- Hot glue
- Utility knife
- Marker
- Measuring tape
Step 1: Cut Out the Parts
Cut out the structure with a utility knife I recommend two 4x6 pieces and two 4x4 squares.
Step 2: Glue Together the Parts
Create a rectangular box by hot gluing the pieces together if they do not fit re-draw and cut the shapes.
Step 3: Make the Front
Next cut out another 4x6 square and then cut out the middle about half an inch in to make a rectangle. DO NOT GLUE IT ON.
Step 4: Start the Window
Get a plastic bag and hot glue or tape it to one side of the already-made skeleton making a window-looking side.
Step 5: Attach the Image
Draw your image and tape it on the back of the window looking into the box.
Step 6: Atach the Lights
cut holes in the sides of the box and put the led strips through the holes.
Step 7: Tilt Up the LED Strips
use paper to tilt up the led strip to a 45-degree angle.
Step 8: Add the Frame
Glue the frame onto the box.
Step 9: Finish It Off
Attach the side of the LED strip with the battery to the top of the box. using tape or glue than put a piece of tape over the other one.
Step 10: Atach the Back
Cut out another piece of cardboard the size of the back and glue it behind the image
![First Time Author](https://content.instructables.com/FK9/YRHS/LLWBKNEI/FK9YRHSLLWBKNEI.jpg?auto=webp&crop=1240%2C600&frame=1&width=320)
This is an entry in the
First Time Author
2 Comments
5 days ago on Step 10
This is Awesome! Great work dude!
5 days ago
Thanks for sharing :)